CAS number
CAS 56-55-3 benz[a]anthracene
CAS 50-32-8 · CAS 53-70-3 · CAS 56-55-3 · CAS 83-32-9 · CAS 85-01-8 · CAS 86-73-7 · CAS 91-20-3 · CAS 120-12-7 · CAS 129-00-0 · CAS 191-24-2 · CAS 192-97-2 · CAS 193-39-5 · CAS 205-82-3 · CAS 205-99-2 · CAS 206-44-0 · CAS 207-08-9 · CAS 208-96-8 · CAS 218-01-9 · EC 200-028-5 · EC 200-181-8 · EC 200-280-6 · EC 201-469-6 · EC 201-581-5 · EC 201-695-5 · EC 202-049-5 · EC 204-371-1 · EC 204-927-3 · EC 205-883-8 · EC 205-892-7 · EC 205-893-2 · EC 205-910-3 · EC 205-911-9 · EC 205-912-4 · EC 205-916-6 · EC 205-917-1 · EC 205-923-4 · Index No 601-033-00-9
Where CAS 56-55-3 appears: every table entry that prints it among its identifiers, in the newest version of each act this record holds, and every recorded change to those entries. Many entries name a group of substances and print no number, so absence here is not absence from the law. Not legal advice.
Where it appears now
CLP Annex VI section 3, Index No 601-033-00-9
Last changed in the version in force , by Regulation (EC) No 790/2009, the act that change names · Annex VI on this site
| Index No | Chemical name | EC No | CAS No | Classification | Labelling | Specific Conc. Limits, M-factors and ATEs | Notes | |||
|---|---|---|---|---|---|---|---|---|---|---|
| Hazard Class and Category Code(s) | Hazard statement Code(s) | Pictogram, Signal Word Code(s) | Hazard statement Code(s) | Suppl. Hazard statement Code(s) | ||||||
| 601-033-00-9 | benz[a]anthracene | 200-280-6 | 56-55-3 | Carc. 1B Aquatic Acute 1 Aquatic Chronic 1 | H350 H400 H410 | GHS08 GHS09 Dgr | H350 H410 | M=100 | ||
CLP Annex VI section 3, table 2, Index No 601-033-00-9
Last changed in the version in force , by Regulation (EC) No 790/2009, the act that change names · Annex VI on this site
| Index No | International Chemical Identification | EC No | CAS No | Classification | Labelling | Concentration Limits | Notes |
|---|---|---|---|---|---|---|---|
| 601-033-00-9 | benz[a]anthracene | 200-280-6 | 56-55-3 | Carc. Cat. 2; R45 N; R50-53 | T; N R: 45-50/53 S: 53-45-60-61 | N; R50-53: C ≥ 0,25 % N; R51-53: 0,025 % ≤ C < 0,25 % R52-53: 0,0025 % ≤ C < 0,025 % |
Cosmetics Regulation Annex II, Reference number 638
No change to this entry since the first version the record holds, in force 11 July 2013. · Annex II on this site
| Reference number | Substance identification | ||
|---|---|---|---|
| Chemical name/INN | CAS number | EC number | |
| a | b | c | d |
| 638 | Benz[a]anthracene | 56-55-3 | 200-280-6 |
REACH Annex XVII, Entry 50
Last changed in the version in force , by Regulation (EU) 2021/1199 and Regulation (EU) 2021/1297, the acts that change names · Annex XVII on this site
| Column 1 Designation of the substance, of the group of substances or of the mixture | Column 2 Conditions of restriction |
|---|---|
| 50. Polycyclic-aromatic hydrocarbons (PAH) (a) Benzo[a]pyrene (BaP) CAS No 50-32-8 (b) Benzo[e]pyrene (BeP) CAS No 192-97-2 (c) Benzo[a]anthracene (BaA) CAS No 56-55-3 (d) Chrysen (CHR) CAS No 218-01-9 (e) Benzo[b]fluoranthene (BbFA) CAS No 205-99-2 (f) Benzo[j]fluoranthene (BjFA) CAS No 205-82-3 (g) Benzo[k]fluoranthene (BkFA) CAS No 207-08-9 (h) Dibenzo[a,h]anthracene (DBAhA) CAS No 53-70-3 | 1. From 1 January 2010, extender oils shall not be placed on the market, or used for the production of tyres or parts of tyres if they contain: more than 1 mg/kg (0,0001 % by weight) BaP, or, more than 10 mg/kg (0,001 % by weight) of the sum of all listed PAHs. The standard EN 16143:2013 (Petroleum products — Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils — Procedure using double LC cleaning and GC/MS analysis) shall be used as the test method for demonstrating conformity with the limits referred to in the first subparagraph. Until 23 September 2016, the limits referred to in the first subparagraph may be regarded as kept, if the polycyclic aromatics (PCA) extract is less than 3 % by weight as measured by the Institute of Petroleum standard IP 346:1998 (Determination of PCA in unused lubricating base oils and asphaltene free petroleum fractions — Dimethyl sulphoxide extraction refractive index method), provided that compliance with the limits of BaP and of the listed PAHs, as well as the correlation of the measured values with the PCA extract, is measured by the manufacturer or importer every six months or after each major operational change, whichever is earlier. 2. Furthermore, tyres and treads for retreading manufactured after 1 January 2010 shall not be placed on the market if they contain extender oils exceeding the limits indicated in paragraph 1. These limits shall be regarded as kept, if the vulcanised rubber compounds do not exceed the limit of 0,35 % Bay protons as measured and calculated by ISO 21461 (Rubber vulcanised — Determination of aromaticity of oil in vulcanised rubber compounds). 3. By way of derogation, paragraph 2 shall not apply to retreaded tyres if their tread does not contain extender oils exceeding the limits referred to in paragraph 1. 4. For the purpose of this entry tyres shall mean tyres for vehicles covered by: Directive 2007/46/EC of the European Parliament and of the Council of 5 September 2007 establishing a framework for the approval of motor vehicles and their trailers , Directive 2003/37/EC of the European Parliament and of the Council of 26 May 2003 on type-approval of agricultural or forestry tractors, their trailers and interchangeable towed machinery, together with their systems, components and separate technical units , and Directive 2002/24/EC of the European Parliament and of the Council of 18 March 2002 relating to the type-approval of two or three-wheel motor vehicles and repealing Council Directive 92/61/EEC . 5. Articles shall not be placed on the market for supply to the general public, if any of their rubber or plastic components that come into direct as well as prolonged or short-term repetitive contact with the human skin or the oral cavity, under normal or reasonably foreseeable conditions of use, contain more than 1 mg/kg (0,0001 % by weight of this component) of any of the listed PAHs. Such articles include amongst others: sport equipment such as bicycles, golf clubs, racquets household utensils, trolleys, walking frames tools for domestic use clothing, footwear, gloves and sportswear watch-straps, wrist-bands, masks, head-bands 6. Toys, including activity toys, and childcare articles, shall not be placed on the market, if any of their rubber or plastic components that come into direct as well as prolonged or short-term repetitive contact with the human skin or the oral cavity, under normal or reasonably foreseeable conditions of use, contain more than 0,5 mg/kg (0,00005 % by weight of this component) of any of the listed PAHs. 7. By way of derogation from paragraphs 5 and 6, these paragraphs shall not apply to articles placed on the market for the first time before 27 December 2015. 8. By 27 December 2017, the Commission shall review the limit values in paragraphs 5 and 6 in the light of new scientific information, including migration of PAHs from the articles referred to therein, and information on alternative raw materials and, if appropriate, modify these paragraphs accordingly. 9. Granules or mulches shall not be placed on the market for use as infill material in synthetic turf pitches or in loose form on playgrounds or in sport applications if they contain more than 20 mg/kg (0,002 % by weight) of the sum of all listed PAHs. 10. Granules or mulches shall not be used as infill material in synthetic turf pitches or in loose form on playgrounds or in sport applications if they contain more than 20 mg/kg (0,002 % by weight) of the sum of all listed PAHs. 11. Granules or mulches placed on the market for use as infill material in synthetic turf pitches or in loose form on playgrounds or in sport applications shall be marked with a unique identification number of the batch. 12. Paragraphs 9 to 11 shall apply from 10 August 2022. 13. Granules or mulches that are in use in the Union on 9 August 2022 as infill material in synthetic turf pitches or in loose form on playgrounds or in sport applications may remain in place and continue to be used there for the same purpose. 14. For the purposes of paragraphs 9 to 13: (a) granules are mixtures that appear as solid particles in the size range from 1 to 4 mm, which are made from rubber or other vulcanised or polymeric material of recycled or virgin origin, or obtained from a natural source; (b) mulches are mixtures that appear as flake-shaped solid particles in the size range from 4 to 130 mm length and 10 to 15 mm width, which are made from rubber or other vulcanised or polymeric material of recycled or virgin origin, or obtained from a natural source; (c) infill material in synthetic turf pitches consists of granules used in synthetic turf pitches to improve the sport technical performance characteristics of the turf system; (d) use in loose form on playgrounds or in sport applications is any use of granules or mulches in loose form on playgrounds or for sport purposes other than as infill material in synthetic turf pitches. |
REACH Annex XVII, Entry 50a
Last changed in the version in force , by Regulation (EU) 2025/660, the act that change names · Annex XVII on this site
| Column 1 Designation of the substance, of the group of substances or of the mixture | Column 2 Conditions of restriction |
|---|---|
| 50a. Polycyclic aromatic hydrocarbons (PAHs) (a) Acenaphthene, CAS No 83-32-9, EC No 201-469-6 (b) Acenaphthylene, CAS No 208-96-8, EC No 205-917-1 (c) Anthracene, CAS No 120-12-7, EC No 204-371-1 (d) Benzo[a]anthracene, CAS No 56-55-3, EC No 200-280-6 (e) Benzo[a]pyrene, CAS No 50-32-8, EC No 200-028-5 (Benzo[def]chrysene) (f) Benzo[b]fluoranthene, CAS No 205-99-2, EC No 205-911-9 (Benzo[e]acephenanthrylene) (g) Benzo[e]pyrene, CAS No 192-97-2 EC, No 205-892-7 (h) Benzo[ghi]perylene, CAS No 191-24-2, EC No 205-883-8 (i) Benzo[j]fluoranthene, CAS No 205-82-3, EC No 205-910-3 (j) Benzo[k]fluoranthene, CAS No 207-08-9, EC No 205-916-6 (k) Chrysene, CAS No 218-01-9, EC No 205-923-4 (l) Dibenzo[a,h]anthracene, CAS No 53-70-3, EC No 200-181-8 (m) Fluoranthene, CAS No 206-44-0, EC No 205-912-4 (n) Fluorene, CAS No 86-73-7, EC No 201-695-5 (o) Indeno[1,2,3cd]pyrene, CAS No 193-39-5, EC No 205-893-2 (p) Naphthalene, CAS No 91-20-3, EC No 202-049-5 (q) Phenanthrene, CAS No 85-01-8, EC No 201-581-5 (r) Pyrene, CAS No 129-00-0, EC No 204-927-3 | Shall not be placed on the market or used, on their own or as constituents of other substances, in clay targets for shooting from 22 April 2026 if they contain more than 50 mg/kg (0,005 % by weight of dry mass of the clay target) of the sum of all listed PAHs. |
REACH Annex XVII appendix 2, Index No 601-033-00-9
No change to this entry since the first version the record holds, in force 12 October 2008. · Annex XVII on this site
| Substances | Index No | EC No | CAS No | Notes |
|---|---|---|---|---|
| Benzo[a]anthracene | 601-033-00-9 | 200-280-6 | 56-55-3 |
REACH Annex XVII appendix 12, the entry for Benz[a]anthracene
Last changed in the version in force , by Regulation (EU) 2018/1513 and Regulation (EU) 2018/675, the acts that change names · Annex XVII on this site
| Substances | Index- No | CAS No | EC No | Concentration limit by weight |
|---|---|---|---|---|
| Benz[a]anthracene | 601-033-00-9 | 56-55-3 | 200-280-6 | 1 mg/kg |
Look up a number
Type a CAS or EC number, with or without its hyphens, or an Index No into the search box at the top of the page: it reads 50000 as CAS 50-00-0. Every number is also listed by act on the substances page.
Its history
· added · REACH Annex XVII, Entry 50a
Recorded in the version in force , by Regulation (EU) 2025/660, the act that change names. The change on its version page
| Identifiers | Column 1 Designation of the substance, of the group of substances or of the mixture | Column 2 Conditions of restriction |
|---|---|---|
| Entry 50aCAS 120-12-7CAS 129-00-0CAS 191-24-2CAS 192-97-2CAS 193-39-5CAS 205-82-3CAS 205-99-2CAS 206-44-0CAS 207-08-9CAS 208-96-8CAS 218-01-9CAS 50-32-8CAS 53-70-3CAS 56-55-3CAS 83-32-9CAS 85-01-8CAS 86-73-7CAS 91-20-3EC 200-028-5EC 200-181-8EC 200-280-6EC 201-469-6EC 201-581-5EC 201-695-5EC 202-049-5EC 204-371-1EC 204-927-3EC 205-883-8EC 205-892-7EC 205-893-2EC 205-910-3EC 205-911-9EC 205-912-4EC 205-916-6EC 205-917-1EC 205-923-4 | 50a. Polycyclic aromatic hydrocarbons (PAHs) (a) Acenaphthene, CAS No 83-32-9, EC No 201-469-6 (b) Acenaphthylene, CAS No 208-96-8, EC No 205-917-1 (c) Anthracene, CAS No 120-12-7, EC No 204-371-1 (d) Benzo[a]anthracene, CAS No 56-55-3, EC No 200-280-6 (e) Benzo[a]pyrene, CAS No 50-32-8, EC No 200-028-5 (Benzo[def]chrysene) (f) Benzo[b]fluoranthene, CAS No 205-99-2, EC No 205-911-9 (Benzo[e]acephenanthrylene) (g) Benzo[e]pyrene, CAS No 192-97-2 EC, No 205-892-7 (h) Benzo[ghi]perylene, CAS No 191-24-2, EC No 205-883-8 (i) Benzo[j]fluoranthene, CAS No 205-82-3, EC No 205-910-3 (j) Benzo[k]fluoranthene, CAS No 207-08-9, EC No 205-916-6 (k) Chrysene, CAS No 218-01-9, EC No 205-923-4 (l) Dibenzo[a,h]anthracene, CAS No 53-70-3, EC No 200-181-8 (m) Fluoranthene, CAS No 206-44-0, EC No 205-912-4 (n) Fluorene, CAS No 86-73-7, EC No 201-695-5 (o) Indeno[1,2,3cd]pyrene, CAS No 193-39-5, EC No 205-893-2 (p) Naphthalene, CAS No 91-20-3, EC No 202-049-5 (q) Phenanthrene, CAS No 85-01-8, EC No 201-581-5 (r) Pyrene, CAS No 129-00-0, EC No 204-927-3 | Shall not be placed on the market or used, on their own or as constituents of other substances, in clay targets for shooting from 22 April 2026 if they contain more than 50 mg/kg (0,005 % by weight of dry mass of the clay target) of the sum of all listed PAHs. |
· amended · REACH Annex XVII, Entry 50
Recorded in the version in force , by Regulation (EU) 2021/1199 and Regulation (EU) 2021/1297, the acts that change names. The change on its version page
| Identifiers | Version | Column 1 Designation of the substance, of the group of substances or of the mixture | Column 2 Conditions of restriction |
|---|---|---|---|
| Entry 50CAS 192-97-2CAS 205-82-3CAS 205-99-2CAS 207-08-9CAS 218-01-9CAS 50-32-8CAS 53-70-3CAS 56-55-3 | Before | 50. Polycyclic-aromatic hydrocarbons (PAH) (a) Benzo[a]pyrene (BaP) CAS No 50-32-8 (b) Benzo[e]pyrene (BeP) CAS No 192-97-2 (c) Benzo[a]anthracene (BaA) CAS No 56-55-3 (d) Chrysen (CHR) CAS No 218-01-9 (e) Benzo[b]fluoranthene (BbFA) CAS No 205-99-2 (f) Benzo[j]fluoranthene (BjFA) CAS No 205-82-3 (g) Benzo[k]fluoranthene (BkFA) CAS No 207-08-9 (h) Dibenzo[a,h]anthracene (DBAhA) CAS No 53-70-3 | 1. From 1 January 2010, extender oils shall not be placed on the market, or used for the production of tyres or parts of tyres if they contain: more than 1 mg/kg (0,0001 % by weight) BaP, or, more than 10 mg/kg (0,001 % by weight) of the sum of all listed PAHs. The standard EN 16143:2013 (Petroleum products — Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils — Procedure using double LC cleaning and GC/MS analysis) shall be used as the test method for demonstrating conformity with the limits referred to in the first subparagraph. Until 23 September 2016, the limits referred to in the first subparagraph may be regarded as kept, if the polycyclic aromatics (PCA) extract is less than 3 % by weight as measured by the Institute of Petroleum standard IP 346:1998 (Determination of PCA in unused lubricating base oils and asphaltene free petroleum fractions — Dimethyl sulphoxide extraction refractive index method), provided that compliance with the limits of BaP and of the listed PAHs, as well as the correlation of the measured values with the PCA extract, is measured by the manufacturer or importer every six months or after each major operational change, whichever is earlier. 2. Furthermore, tyres and treads for retreading manufactured after 1 January 2010 shall not be placed on the market if they contain extender oils exceeding the limits indicated in paragraph 1. These limits shall be regarded as kept, if the vulcanised rubber compounds do not exceed the limit of 0,35 % Bay protons as measured and calculated by ISO 21461 (Rubber vulcanised — Determination of aromaticity of oil in vulcanised rubber compounds). 3. By way of derogation, paragraph 2 shall not apply to retreaded tyres if their tread does not contain extender oils exceeding the limits referred to in paragraph 1. 4. For the purpose of this entry tyres shall mean tyres for vehicles covered by: Directive 2007/46/EC of the European Parliament and of the Council of 5 September 2007 establishing a framework for the approval of motor vehicles and their trailers , Directive 2003/37/EC of the European Parliament and of the Council of 26 May 2003 on type-approval of agricultural or forestry tractors, their trailers and interchangeable towed machinery, together with their systems, components and separate technical units , and Directive 2002/24/EC of the European Parliament and of the Council of 18 March 2002 relating to the type-approval of two or three-wheel motor vehicles and repealing Council Directive 92/61/EEC . 5. Articles shall not be placed on the market for supply to the general public, if any of their rubber or plastic components that come into direct as well as prolonged or short-term repetitive contact with the human skin or the oral cavity, under normal or reasonably foreseeable conditions of use, contain more than 1 mg/kg (0,0001 % by weight of this component) of any of the listed PAHs. Such articles include amongst others: sport equipment such as bicycles, golf clubs, racquets household utensils, trolleys, walking frames tools for domestic use clothing, footwear, gloves and sportswear watch-straps, wrist-bands, masks, head-bands 6. Toys, including activity toys, and childcare articles, shall not be placed on the market, if any of their rubber or plastic components that come into direct as well as prolonged or short-term repetitive contact with the human skin or the oral cavity, under normal or reasonably foreseeable conditions of use, contain more than 0,5 mg/kg (0,00005 % by weight of this component) of any of the listed PAHs. 7. By way of derogation from paragraphs 5 and 6, these paragraphs shall not apply to articles placed on the market for the first time before 27 December 2015. 8. By 27 December 2017, the Commission shall review the limit values in paragraphs 5 and 6 in the light of new scientific information, including migration of PAHs from the articles referred to therein, and information on alternative raw materials and, if appropriate, modify these paragraphs accordingly. |
| After | 50. Polycyclic-aromatic hydrocarbons (PAH) (a) Benzo[a]pyrene (BaP) CAS No 50-32-8 (b) Benzo[e]pyrene (BeP) CAS No 192-97-2 (c) Benzo[a]anthracene (BaA) CAS No 56-55-3 (d) Chrysen (CHR) CAS No 218-01-9 (e) Benzo[b]fluoranthene (BbFA) CAS No 205-99-2 (f) Benzo[j]fluoranthene (BjFA) CAS No 205-82-3 (g) Benzo[k]fluoranthene (BkFA) CAS No 207-08-9 (h) Dibenzo[a,h]anthracene (DBAhA) CAS No 53-70-3 | 1. From 1 January 2010, extender oils shall not be placed on the market, or used for the production of tyres or parts of tyres if they contain: more than 1 mg/kg (0,0001 % by weight) BaP, or, more than 10 mg/kg (0,001 % by weight) of the sum of all listed PAHs. The standard EN 16143:2013 (Petroleum products — Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils — Procedure using double LC cleaning and GC/MS analysis) shall be used as the test method for demonstrating conformity with the limits referred to in the first subparagraph. Until 23 September 2016, the limits referred to in the first subparagraph may be regarded as kept, if the polycyclic aromatics (PCA) extract is less than 3 % by weight as measured by the Institute of Petroleum standard IP 346:1998 (Determination of PCA in unused lubricating base oils and asphaltene free petroleum fractions — Dimethyl sulphoxide extraction refractive index method), provided that compliance with the limits of BaP and of the listed PAHs, as well as the correlation of the measured values with the PCA extract, is measured by the manufacturer or importer every six months or after each major operational change, whichever is earlier. 2. Furthermore, tyres and treads for retreading manufactured after 1 January 2010 shall not be placed on the market if they contain extender oils exceeding the limits indicated in paragraph 1. These limits shall be regarded as kept, if the vulcanised rubber compounds do not exceed the limit of 0,35 % Bay protons as measured and calculated by ISO 21461 (Rubber vulcanised — Determination of aromaticity of oil in vulcanised rubber compounds). 3. By way of derogation, paragraph 2 shall not apply to retreaded tyres if their tread does not contain extender oils exceeding the limits referred to in paragraph 1. 4. For the purpose of this entry tyres shall mean tyres for vehicles covered by: Directive 2007/46/EC of the European Parliament and of the Council of 5 September 2007 establishing a framework for the approval of motor vehicles and their trailers , Directive 2003/37/EC of the European Parliament and of the Council of 26 May 2003 on type-approval of agricultural or forestry tractors, their trailers and interchangeable towed machinery, together with their systems, components and separate technical units , and Directive 2002/24/EC of the European Parliament and of the Council of 18 March 2002 relating to the type-approval of two or three-wheel motor vehicles and repealing Council Directive 92/61/EEC . 5. Articles shall not be placed on the market for supply to the general public, if any of their rubber or plastic components that come into direct as well as prolonged or short-term repetitive contact with the human skin or the oral cavity, under normal or reasonably foreseeable conditions of use, contain more than 1 mg/kg (0,0001 % by weight of this component) of any of the listed PAHs. Such articles include amongst others: sport equipment such as bicycles, golf clubs, racquets household utensils, trolleys, walking frames tools for domestic use clothing, footwear, gloves and sportswear watch-straps, wrist-bands, masks, head-bands 6. Toys, including activity toys, and childcare articles, shall not be placed on the market, if any of their rubber or plastic components that come into direct as well as prolonged or short-term repetitive contact with the human skin or the oral cavity, under normal or reasonably foreseeable conditions of use, contain more than 0,5 mg/kg (0,00005 % by weight of this component) of any of the listed PAHs. 7. By way of derogation from paragraphs 5 and 6, these paragraphs shall not apply to articles placed on the market for the first time before 27 December 2015. 8. By 27 December 2017, the Commission shall review the limit values in paragraphs 5 and 6 in the light of new scientific information, including migration of PAHs from the articles referred to therein, and information on alternative raw materials and, if appropriate, modify these paragraphs accordingly. 9. Granules or mulches shall not be placed on the market for use as infill material in synthetic turf pitches or in loose form on playgrounds or in sport applications if they contain more than 20 mg/kg (0,002 % by weight) of the sum of all listed PAHs. 10. Granules or mulches shall not be used as infill material in synthetic turf pitches or in loose form on playgrounds or in sport applications if they contain more than 20 mg/kg (0,002 % by weight) of the sum of all listed PAHs. 11. Granules or mulches placed on the market for use as infill material in synthetic turf pitches or in loose form on playgrounds or in sport applications shall be marked with a unique identification number of the batch. 12. Paragraphs 9 to 11 shall apply from 10 August 2022. 13. Granules or mulches that are in use in the Union on 9 August 2022 as infill material in synthetic turf pitches or in loose form on playgrounds or in sport applications may remain in place and continue to be used there for the same purpose. 14. For the purposes of paragraphs 9 to 13: (a) granules are mixtures that appear as solid particles in the size range from 1 to 4 mm, which are made from rubber or other vulcanised or polymeric material of recycled or virgin origin, or obtained from a natural source; (b) mulches are mixtures that appear as flake-shaped solid particles in the size range from 4 to 130 mm length and 10 to 15 mm width, which are made from rubber or other vulcanised or polymeric material of recycled or virgin origin, or obtained from a natural source; (c) infill material in synthetic turf pitches consists of granules used in synthetic turf pitches to improve the sport technical performance characteristics of the turf system; (d) use in loose form on playgrounds or in sport applications is any use of granules or mulches in loose form on playgrounds or for sport purposes other than as infill material in synthetic turf pitches. |
· added · REACH Annex XVII appendix 12, the entry for Benz[a]anthracene
Recorded in the version in force , by Regulation (EU) 2018/1513 and Regulation (EU) 2018/675, the acts that change names. The change on its version page
| Identifiers | Substances | Index- No | CAS No | EC No | Concentration limit by weight |
|---|---|---|---|---|---|
| Benz[a]anthraceneCAS 56-55-3EC 200-280-6Index No 601-033-00-9 | Benz[a]anthracene | 601-033-00-9 | 56-55-3 | 200-280-6 | 1 mg/kg |
· amended · REACH Annex XVII, Entry 50
Recorded in the version in force , by Regulation (EU) 2016/26, the act that change names. Only spacing, dash forms or accents differ. The change on its version page
| Identifiers | Version | Column 1 Designation of the substance, of the group of substances or of the mixture | Column 2 Conditions of restriction |
|---|---|---|---|
| Entry 50CAS 192-97-2CAS 205-82-3CAS 205-99-2CAS 207-08-9CAS 218-01-9CAS 50-32-8CAS 53-70-3CAS 56-55-3 | Before | 50. Polycyclic-aromatic hydrocarbons (PAH) (a) Benzo[a]pyrene (BaP) CAS No 50-32-8 (b) Benzo[e]pyrene (BeP) CAS No 192-97-2 (c) Benzo[a]anthracene (BaA) CAS No 56-55-3 (d) Chrysen (CHR) CAS No 218-01-9 (e) Benzo[b]fluoranthene (BbFA) CAS No 205-99-2 (f) Benzo[j]fluoranthene (BjFA) CAS No 205-82-3 (g) Benzo[k]fluoranthene (BkFA) CAS No 207-08-9 (h) Dibenzo[a,h]anthracene (DBAhA) CAS No 53-70-3 | 1. From 1 January 2010, extender oils shall not be placed on the market, or used for the production of tyres or parts of tyres if they contain:
more than 1 mg/kg (0,0001 % by weight) BaP, or,
more than 10 mg/kg (0,001 % by weight) of the sum of all listed PAHs.
The standard EN 16143:2013 (Petroleum products — Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils — Procedure using double LC cleaning and GC/MS analysis) shall be used as the test method for demonstrating conformity with the limits referred to in the first subparagraph.
Until 23 September 2016, the limits referred to in the first subparagraph may be regarded as kept, if the polycyclic aromatics (PCA) extract is less than 3 % by weight as measured by the Institute of Petroleum standard IP 346:1998 (Determination of PCA in unused lubricating base oils and asphaltene free petroleum fractions — Dimethyl sulphoxide extraction refractive index method), provided that compliance with the limits of BaP and of the listed PAHs, as well as the |
| After | 50. Polycyclic-aromatic hydrocarbons (PAH) (a) Benzo[a]pyrene (BaP) CAS No 50-32-8 (b) Benzo[e]pyrene (BeP) CAS No 192-97-2 (c) Benzo[a]anthracene (BaA) CAS No 56-55-3 (d) Chrysen (CHR) CAS No 218-01-9 (e) Benzo[b]fluoranthene (BbFA) CAS No 205-99-2 (f) Benzo[j]fluoranthene (BjFA) CAS No 205-82-3 (g) Benzo[k]fluoranthene (BkFA) CAS No 207-08-9 (h) Dibenzo[a,h]anthracene (DBAhA) CAS No 53-70-3 | 1. From 1 January 2010, extender oils shall not be placed on the market, or used for the production of tyres or parts of tyres if they contain: more than 1 mg/kg (0,0001 % by weight) BaP, or, more than 10 mg/kg (0,001 % by weight) of the sum of all listed PAHs. The standard EN 16143:2013 (Petroleum products — Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils — Procedure using double LC cleaning and GC/MS analysis) shall be used as the test method for demonstrating conformity with the limits referred to in the first subparagraph. Until 23 September 2016, the limits referred to in the first subparagraph may be regarded as kept, if the polycyclic aromatics (PCA) extract is less than 3 % by weight as measured by the Institute of Petroleum standard IP 346:1998 (Determination of PCA in unused lubricating base oils and asphaltene free petroleum fractions — Dimethyl sulphoxide extraction refractive index method), provided that compliance with the limits of BaP and of the listed PAHs, as well as the correlation of the measured values with the PCA extract, is measured by the manufacturer or importer every six months or after each major operational change, whichever is earlier. 2. Furthermore, tyres and treads for retreading manufactured after 1 January 2010 shall not be placed on the market if they contain extender oils exceeding the limits indicated in paragraph 1. These limits shall be regarded as kept, if the vulcanised rubber compounds do not exceed the limit of 0,35 % Bay protons as measured and calculated by ISO 21461 (Rubber vulcanised — Determination of aromaticity of oil in vulcanised rubber compounds). 3. By way of derogation, paragraph 2 shall not apply to retreaded tyres if their tread does not contain extender oils exceeding the limits referred to in paragraph 1. 4. For the purpose of this entry tyres shall mean tyres for vehicles covered by: Directive 2007/46/EC of the European Parliament and of the Council of 5 September 2007 establishing a framework for the approval of motor vehicles and their trailers , Directive 2003/37/EC of the European Parliament and of the Council of 26 May 2003 on type-approval of agricultural or forestry tractors, their trailers and interchangeable towed machinery, together with their systems, components and separate technical units , and Directive 2002/24/EC of the European Parliament and of the Council of 18 March 2002 relating to the type-approval of two or three-wheel motor vehicles and repealing Council Directive 92/61/EEC . 5. Articles shall not be placed on the market for supply to the general public, if any of their rubber or plastic components that come into direct as well as prolonged or short-term repetitive contact with the human skin or the oral cavity, under normal or reasonably foreseeable conditions of use, contain more than 1 mg/kg (0,0001 % by weight of this component) of any of the listed PAHs. Such articles include amongst others: sport equipment such as bicycles, golf clubs, racquets household utensils, trolleys, walking frames tools for domestic use clothing, footwear, gloves and sportswear watch-straps, wrist-bands, masks, head-bands 6. Toys, including activity toys, and childcare articles, shall not be placed on the market, if any of their rubber or plastic components that come into direct as well as prolonged or short-term repetitive contact with the human skin or the oral cavity, under normal or reasonably foreseeable conditions of use, contain more than 0,5 mg/kg (0,00005 % by weight of this component) of any of the listed PAHs. 7. By way of derogation from paragraphs 5 and 6, these paragraphs shall not apply to articles placed on the market for the first time before 27 December 2015. 8. By 27 December 2017, the Commission shall review the limit values in paragraphs 5 and 6 in the light of new scientific information, including migration of PAHs from the articles referred to therein, and information on alternative raw materials and, if appropriate, modify these paragraphs accordingly. |
· amended · REACH Annex XVII, Entry 50
Recorded in the version in force , by Regulation (EU) No 1272/2013, the act that change names. The change on its version page
| Identifiers | Version | Column 1 Designation of the substance, of the group of substances or of the mixture | Column 2 Conditions of restriction |
|---|---|---|---|
| Entry 50CAS 192-97-2CAS 205-82-3CAS 205-99-2CAS 207-08-9CAS 218-01-9CAS 50-32-8CAS 53-70-3CAS 56-55-3 | Before | 50. Polycyclic-aromatic hydrocarbons (PAH) (a) Benzo[a]pyrene (BaP) CAS No 50-32-8 (b) Benzo[e]pyrene (BeP) CAS No 192-97-2 (c) Benzo[a]anthracene (BaA) CAS No 56-55-3 (d) Chrysen (CHR) CAS No 218-01-9 (e) Benzo[b]fluoranthene (BbFA) CAS No 205-99-2 (f) Benzo[j]fluoranthene (BjFA) CAS No 205-82-3 (g) Benzo[k]fluoranthene (BkFA) CAS No 207-08-9 (h) Dibenzo[a,h]anthracene (DBAhA) CAS No 53-70-3 | 1. From 1 January 2010, extender oils shall not be placed on the market, or used for the production of tyres or parts of tyres if they contain: more than 1 mg/kg (0,0001 % by weight) BaP, or, more than 10 mg/kg (0,001 % by weight) of the sum of all listed PAHs. The standard EN 16143:2013 (Petroleum products — Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils — Procedure using double LC cleaning and GC/MS analysis) shall be used as the test method for demonstrating conformity with the limits referred to in the first subparagraph. Until 23 September 2016, the limits referred to in the first subparagraph may be regarded as kept, if the polycyclic aromatics (PCA) extract is less than 3 % by weight as measured by the Institute of Petroleum standard IP 346:1998 (Determination of PCA in unused lubricating base oils and asphaltene free petroleum fractions — Dimethyl sulphoxide extraction refractive index method), provided that compliance with the limits of BaP and of the listed PAHs, as well as the correlationof the measured values with the PCA extract, is measured by the manufacturer or importer every six months or after each major operational change, whichever is earlier. 2. Furthermore, tyres and treads for retreading manufactured after 1 January 2010 shall not be placed on the market if they contain extender oils exceeding the limits indicated in paragraph 1. These limits shall be regarded as kept, if the vulcanised rubber compounds do not exceed the limit of 0,35 % Bay protons as measured and calculated by ISO 21461 (Rubber vulcanised — Determination of aromaticity of oil in vulcanised rubber compounds). 3. By way of derogation, paragraph 2 shall not apply to retreaded tyres if their tread does not contain extender oils exceeding the limits referred to in paragraph 1. 4. For the purpose of this entry tyres shall mean tyres for vehicles covered by: Directive 2007/46/EC of the European Parliament and of the Council of 5 September 2007 establishing a framework for the approval of motor vehicles and their trailers , Directive 2003/37/EC of the European Parliament and of the Council of 26 May 2003 on type-approval of agricultural or forestry tractors, their trailers and interchangeable towed machinery, together with their systems, components and separate technical units , and Directive 2002/24/EC of the European Parliament and of the Council of 18 March 2002 relating to the type-approval of two or three-wheel motor vehicles and repealing Council Directive 92/61/EEC . |
| After | 50. Polycyclic-aromatic hydrocarbons (PAH) (a) Benzo[a]pyrene (BaP) CAS No 50-32-8 (b) Benzo[e]pyrene (BeP) CAS No 192-97-2 (c) Benzo[a]anthracene (BaA) CAS No 56-55-3 (d) Chrysen (CHR) CAS No 218-01-9 (e) Benzo[b]fluoranthene (BbFA) CAS No 205-99-2 (f) Benzo[j]fluoranthene (BjFA) CAS No 205-82-3 (g) Benzo[k]fluoranthene (BkFA) CAS No 207-08-9 (h) Dibenzo[a,h]anthracene (DBAhA) CAS No 53-70-3 | 1. From 1 January 2010, extender oils shall not be placed on the market, or used for the production of tyres or parts of tyres if they contain: more than 1 mg/kg (0,0001 % by weight) BaP, or, more than 10 mg/kg (0,001 % by weight) of the sum of all listed PAHs. The standard EN 16143:2013 (Petroleum products — Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils — Procedure using double LC cleaning and GC/MS analysis) shall be used as the test method for demonstrating conformity with the limits referred to in the first subparagraph. Until 23 September 2016, the limits referred to in the first subparagraph may be regarded as kept, if the polycyclic aromatics (PCA) extract is less than 3 % by weight as measured by the Institute of Petroleum standard IP 346:1998 (Determination of PCA in unused lubricating base oils and asphaltene free petroleum fractions — Dimethyl sulphoxide extraction refractive index method), provided that compliance with the limits of BaP and of the listed PAHs, as well as the correlationof the measured values with the PCA extract, is measured by the manufacturer or importer every six months or after each major operational change, whichever is earlier. 2. Furthermore, tyres and treads for retreading manufactured after 1 January 2010 shall not be placed on the market if they contain extender oils exceeding the limits indicated in paragraph 1. These limits shall be regarded as kept, if the vulcanised rubber compounds do not exceed the limit of 0,35 % Bay protons as measured and calculated by ISO 21461 (Rubber vulcanised — Determination of aromaticity of oil in vulcanised rubber compounds). 3. By way of derogation, paragraph 2 shall not apply to retreaded tyres if their tread does not contain extender oils exceeding the limits referred to in paragraph 1. 4. For the purpose of this entry tyres shall mean tyres for vehicles covered by: Directive 2007/46/EC of the European Parliament and of the Council of 5 September 2007 establishing a framework for the approval of motor vehicles and their trailers , Directive 2003/37/EC of the European Parliament and of the Council of 26 May 2003 on type-approval of agricultural or forestry tractors, their trailers and interchangeable towed machinery, together with their systems, components and separate technical units , and Directive 2002/24/EC of the European Parliament and of the Council of 18 March 2002 relating to the type-approval of two or three-wheel motor vehicles and repealing Council Directive 92/61/EEC . 5. Articles shall not be placed on the market for supply to the general public, if any of their rubber or plastic components that come into direct as well as prolonged or short-term repetitive contact with the human skin or the oral cavity, under normal or reasonably foreseeable conditions of use, contain more than 1 mg/kg (0,0001 % by weight of this component) of any of the listed PAHs. Such articles include amongst others: sport equipment such as bicycles, golf clubs, racquets household utensils, trolleys, walking frames tools for domestic use clothing, footwear, gloves and sportswear watch-straps, wrist-bands, masks, head-bands 6. Toys, including activity toys, and childcare articles, shall not be placed on the market, if any of their rubber or plastic components that come into direct as well as prolonged or short-term repetitive contact with the human skin or the oral cavity, under normal or reasonably foreseeable conditions of use, contain more than 0,5 mg/kg (0,00005 % by weight of this component) of any of the listed PAHs. 7. By way of derogation from paragraphs 5 and 6, these paragraphs shall not apply to articles placed on the market for the first time before 27 December 2015. 8. By 27 December 2017, the Commission shall review the limit values in paragraphs 5 and 6 in the light of new scientific information, including migration of PAHs from the articles referred to therein, and information on alternative raw materials and, if appropriate, modify these paragraphs accordingly. |
· amended · REACH Annex XVII, Entry 50
Recorded in the version in force , by Regulation (EU) 2015/282 and Regulation (EU) 2015/326, the acts that change names. The change on its version page
| Identifiers | Version | Column 1 Designation of the substance, of the group of substances or of the mixture | Column 2 Conditions of restriction |
|---|---|---|---|
| Entry 50CAS 192-97-2CAS 205-82-3CAS 205-99-2CAS 207-08-9CAS 218-01-9CAS 50-32-8CAS 53-70-3CAS 56-55-3 | Before | 50. Polycyclic-aromatic hydrocarbons (PAH) (a) Benzo[a]pyrene (BaP) CAS No 50-32-8 (b) Benzo[e]pyrene (BeP) CAS No 192-97-2 (c) Benzo[a]anthracene (BaA) CAS No 56-55-3 (d) Chrysen (CHR) CAS No 218-01-9 (e) Benzo[b]fluoranthene (BbFA) CAS No 205-99-2 (f) Benzo[j]fluoranthene (BjFA) CAS No 205-82-3 (g) Benzo[k]fluoranthene (BkFA) CAS No 207-08-9 (h) Dibenzo[a,h]anthracene (DBAhA) CAS No 53-70-3 | 1. From 1 January 2010, extender oils shall not be placed on the market, or used for the production of tyres or parts of tyres if they contain:
more than 1 mg/kg (0,0001 % by weight) BaP, or,
more than 10 mg/kg (0,001 % by weight) of the sum of all listed PAHs.
|
| After | 50. Polycyclic-aromatic hydrocarbons (PAH) (a) Benzo[a]pyrene (BaP) CAS No 50-32-8 (b) Benzo[e]pyrene (BeP) CAS No 192-97-2 (c) Benzo[a]anthracene (BaA) CAS No 56-55-3 (d) Chrysen (CHR) CAS No 218-01-9 (e) Benzo[b]fluoranthene (BbFA) CAS No 205-99-2 (f) Benzo[j]fluoranthene (BjFA) CAS No 205-82-3 (g) Benzo[k]fluoranthene (BkFA) CAS No 207-08-9 (h) Dibenzo[a,h]anthracene (DBAhA) CAS No 53-70-3 | 1. From 1 January 2010, extender oils shall not be placed on the market, or used for the production of tyres or parts of tyres if they contain: more than 1 mg/kg (0,0001 % by weight) BaP, or, more than 10 mg/kg (0,001 % by weight) of the sum of all listed PAHs. The standard EN 16143:2013 (Petroleum products — Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils — Procedure using double LC cleaning and GC/MS analysis) shall be used as the test method for demonstrating conformity with the limits referred to in the first subparagraph. Until 23 September 2016, the limits referred to in the first subparagraph may be regarded as kept, if the polycyclic aromatics (PCA) extract is less than 3 % by weight as measured by the Institute of Petroleum standard IP 346:1998 (Determination of PCA in unused lubricating base oils and asphaltene free petroleum fractions — Dimethyl sulphoxide extraction refractive index method), provided that compliance with the limits of BaP and of the listed PAHs, as well as the correlation of the measured values with the PCA extract, is measured by the manufacturer or importer every six months or after each major operational change, whichever is earlier. 2. Furthermore, tyres and treads for retreading manufactured after 1 January 2010 shall not be placed on the market if they contain extender oils exceeding the limits indicated in paragraph 1. These limits shall be regarded as kept, if the vulcanised rubber compounds do not exceed the limit of 0,35 % Bay protons as measured and calculated by ISO 21461 (Rubber vulcanised — Determination of aromaticity of oil in vulcanised rubber compounds). 3. By way of derogation, paragraph 2 shall not apply to retreaded tyres if their tread does not contain extender oils exceeding the limits referred to in paragraph 1. 4. For the purpose of this entry tyres shall mean tyres for vehicles covered by: Directive 2007/46/EC of the European Parliament and of the Council of 5 September 2007 establishing a framework for the approval of motor vehicles and their trailers , Directive 2003/37/EC of the European Parliament and of the Council of 26 May 2003 on type-approval of agricultural or forestry tractors, their trailers and interchangeable towed machinery, together with their systems, components and separate technical units , and Directive 2002/24/EC of the European Parliament and of the Council of 18 March 2002 relating to the type-approval of two or three-wheel motor vehicles and repealing Council Directive 92/61/EEC . |
· amended · CLP Annex VI section 3, Index No 601-033-00-9
Recorded in the version in force , by Regulation (EC) No 790/2009, the act that change names. The change on its version page
| Identifiers | Version | Index No | International Chemical Identification | EC No | CAS No | Classification | Labelling | Specific Conc. Limits, M-factors | Notes | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Hazard Class and Category Code(s) | Hazard statement Code(s) | Pictogram, Signal Word Code(s) | Hazard statement Code(s) | Suppl. Hazard statement Code(s) | ||||||||
| Index No 601-033-00-9CAS 56-55-3EC 200-280-6 | Before | 601-033-00-9 | benz[a]anthracene | 200-280-6 | 56-55-3 | Carc. 1B Aquatic Acute 1 Aquatic Chronic 1 | H350 H400 H410 | GHS08 GHS09 Dgr | H350 H410 | |||
| After | 601-033-00-9 | benz[a]anthracene | 200-280-6 | 56-55-3 | Carc. 1B Aquatic Acute 1 Aquatic Chronic 1 | H350 H400 H410 | GHS08 GHS09 Dgr | H350 H410 | M=100 | |||
· amended · CLP Annex VI section 3, table 2, Index No 601-033-00-9
Recorded in the version in force , by Regulation (EC) No 790/2009, the act that change names. The change on its version page
| Identifiers | Version | Index No | International Chemical Identification | EC No | CAS No | Classification | Labelling | Concentration Limits | Notes |
|---|---|---|---|---|---|---|---|---|---|
| Index No 601-033-00-9CAS 56-55-3EC 200-280-6 | Before | 601-033-00-9 | benz[a]anthracene | 200-280-6 | 56-55-3 | Carc. Cat. 2; R45 N; R50-53 | T; N R: 45-50/53 S: 53-45-60-61 | ||
| After | 601-033-00-9 | benz[a]anthracene | 200-280-6 | 56-55-3 | Carc. Cat. 2; R45 N; R50-53 | T; N R: 45-50/53 S: 53-45-60-61 | N; R50-53: C ≥ 0,25 % N; R51-53: 0,025 % ≤ C < 0,25 % R52-53: 0,0025 % ≤ C < 0,025 % |
· amended · REACH Annex XVII, Entry 50
Recorded in the version in force , by Regulation (EC) No 552/2009, the act that change names. The change on its version page
| Identifiers | Version | Column 1 Designation of the substance, of the group of substances or of the mixture | Column 2 Conditions of restriction |
|---|---|---|---|
| Entry 50CAS 192-97-2CAS 205-82-3CAS 205-99-2CAS 207-08-9CAS 218-01-9CAS 50-32-8CAS 53-70-3CAS 56-55-3 | Before | 50. Polycyclic-aromatic hydrocarbons (PAH)
| 1. |
| After | 50. Polycyclic-aromatic hydrocarbons (PAH) (a) Benzo[a]pyrene (BaP) CAS No 50-32-8 (b) Benzo[e]pyrene (BeP) CAS No 192-97-2 (c) Benzo[a]anthracene (BaA) CAS No 56-55-3 (d) Chrysen (CHR) CAS No 218-01-9 (e) Benzo[b]fluoranthene (BbFA) CAS No 205-99-2 (f) Benzo[j]fluoranthene (BjFA) CAS No 205-82-3 (g) Benzo[k]fluoranthene (BkFA) CAS No 207-08-9 (h) Dibenzo[a,h]anthracene (DBAhA) CAS No 53-70-3 | 1. From 1 January 2010, extender oils shall not be placed on the market, or used for the production of tyres or parts of tyres if they contain: more than 1 mg/kg (0,0001 % by weight) BaP, or, more than 10 mg/kg (0,001 % by weight) of the sum of all listed PAHs. These limits shall be regarded as kept, if the polycyclic aromatics (PCA) extract is less than 3 % by weight as measured by the Institute of Petroleum standard IP346: 1998 (Determination of PCA in unused lubricating base oils and asphaltene free petroleum fractions — Dimethyl sulphoxide extraction refractive index method), provided that compliance with the limit values of BaP and of the listed PAHs, as well as the correlation of the measured values with the PCA extract, is controlled by the manufacturer or importer every six months or after each major operational change, whichever is earlier. 2. Furthermore, tyres and treads for retreading manufactured after 1 January 2010 shall not be placed on the market if they contain extender oils exceeding the limits indicated in paragraph 1. These limits shall be regarded as kept, if the vulcanised rubber compounds do not exceed the limit of 0,35 % Bay protons as measured and calculated by ISO 21461 (Rubber vulcanised — Determination of aromaticity of oil in vulcanised rubber compounds). 3. By way of derogation, paragraph 2 shall not apply to retreaded tyres if their tread does not contain extender oils exceeding the limits referred to in paragraph 1. 4. For the purpose of this entry tyres shall mean tyres for vehicles covered by: Directive 2007/46/EC of the European Parliament and of the Council of 5 September 2007 establishing a framework for the approval of motor vehicles and their trailers , Directive 2003/37/EC of the European Parliament and of the Council of 26 May 2003 on type-approval of agricultural or forestry tractors, their trailers and interchangeable towed machinery, together with their systems, components and separate technical units , and Directive 2002/24/EC of the European Parliament and of the Council of 18 March 2002 relating to the type-approval of two or three-wheel motor vehicles and repealing Council Directive 92/61/EEC . |
Sources
- CLP: every version the record holds; rows read from EUR-Lex consolidated version 02008R1272-20270101, in force 1 January 2027 (external, EUR-Lex)
- Cosmetics Regulation: every version the record holds; rows read from EUR-Lex consolidated version 02009R1223-20260518, in force 18 May 2026 (external, EUR-Lex)
- REACH: every version the record holds; rows read from EUR-Lex consolidated version 02006R1907-20260622, detected 11 September 2026 (external, EUR-Lex)